Sika - Antisol E - Concrete Curing Membrane
Antisol-E is an emulsified paraffin based curing membrane. It is ready-for-use and simple to apply. Antisol-E will form a thin film, covering the surface of the concrete to prevent premature water loss due to evaporation.
Antisol-E is used mainly for structural concrete surfaces where subsequent surface treatments will not be required, for example fair-faced concrete. Antisol-E is sprayed onto newly laid concrete surfaces to form a thin film barrier against premature water loss. Without disturbance to the normal setting action, the concrete is then allowed to cure and achieve maximum physical properties. Antisol-E is especially suitable for trafficable surfaces and in large areas of exposed concrete, such as:
- Runways and taxiways
- Aprons and hardstandings
- Roof decks
- Retaining walls
- Pre-stressed beams and piers
- Precast elements
Antisol-E provides the following beneficial properties to concrete surfaces:
- Reduces incidences of plastic cracking
- Enables achievement of desired strengths
- Minimises shrinkage
- Reduces dusting
- Replaces inconvenient curing methods such as hessian-watering, etc.
No Content for now.